Refurbished Walker Neer Cable Tool Rig

Based on our current oil/gas operations, we have decided to sell our cable tool workover/drilling rig.
We purchased the rig (as is) with plans of using it on our existing wells to be re-entered, and in some cases deepening the wells to thin untapped pay zones. Using the cable tool for deepening an existing well into a thin zone is the best way to capture the cuttings to provide the PE/Geologists the information needed to develop the best location within the pay zone. In addition, we planned to use the rig for pulling and installing rod and tubing on several of our wells and removing and setting packers. We currently are doing other operations mainly on our gas wells that do not require our own rig.
When we acquired the (as is) rig, it was necessary to service and upgraded a great deal on the rig as follows: Complete servicing of the truck and rig engines. Included changing oil and air filters. Changed oil in transmissions and rear ends. Cleaned radiators and refilled with antifreeze. Replaced oil in front hubs. Flushed power steering system. Rebuilt hydraulic systems, new pump, and installed new leveling jacks. Installed all new hydraulic hoses and relief valve. Installed eight new rear tires and new brake pods. Serviced hydraulic winch and installed new ¾” cable to raise mast poles. Replaced air control system hoses and installed new foot throttle control. Rewired starting controls. Serviced main draw works and adjusted drum brakes. Changed seals on rig transmission PTO. Rebuilt starter on rig engine. Installed new batteries. The rig is road legal and can also be transported on a lowboy trailer.